#前言
今天如果有人访问我的博客,你会发现大部分时间无法访问,不止我的博客,我服务器上所有站点都无法访问,后来就断断续续能访问,再后来就正常了。对此,我向影响到你使用体验不佳的朋友们说声抱歉。这几天折腾了不少东西,脑子都快不够用了,赶紧整理整理。
#换服务器
是的,又换服务器了。
今天早上一起床,第一件事就是备份插着移动硬盘的笔记本里的网站数据,是的,那个移动服务器现在插在笔记本上了。其实这件事昨晚就该干了,太困了睡着了。几天前我买了块M.2 sata3 2280固态,二手的,就是给小主机当系统盘的。测试了几天,小主机很稳定,于是趁今天休息,把服务器转移过来。本地备份和拷贝数据是非常快的,再加上我配置的shell命令,完全可以自动化部署。从此Linux不再用虚拟机了。
11点多的时候,收到一份邮件——阿里云双十一活动,2G2核心3M只需99元/年,可同价续费三年。于是我更兴奋了。直接拿下。其实这跟之前我买的轻量服务器配置差不多,而这款主机的带宽是固定带宽,价格更是没有可比性,还免费分配IPv6,只是我感觉这IPv6是内网地址,跟我电脑上分配的IPv6一样,公网访问不了。配置完新服务器,我就把轻量云给退了,退款按天计算。
话说这个退款也不容易找,服务器管理界面连退款按钮都容不下。后来Bing了一下,找到阿里云的产品文档,拉到底,有个登录阿里云退订管理页面,点进去就看见了。好了,又省了一大笔巨款。
#frp内网穿透更新换代
很久没管frp了,一个版本用着还很稳定,稳定到你都快忘了它。前几天突然发现frp官方文档和往常不一样,我才知道frp更新换代了,从0.52.0版本开始使用新的配置文件(TOML、YAML 和 JSON),老配置文件.ini截止到0.51.3版本。新版本的配置我折腾了一下午,这就是为什么今天我的博客大部分时间无法访问的原因了。它其实不难,可能一开始不适应,我就适应了一下午。基本上可以满足我当前的需求了。其中让我一眼看中的功能就是它支持配置拆分(includes),好比nginx各主机的配置文件.conf一样,需要哪个配置哪个,不需要删文件重启服务就好了。
配置参考完整版frps_full_example.toml和frpc_full_example,如果不能访问GitHub,可以看下面,怎么样,是不是很细。
frps.toml完整配置:
# This configuration file is for reference only. Please do not use this configuration directly to run the program as it may have various issues.
# A literal address or host name for IPv6 must be enclosed
# in square brackets, as in "[::1]:80", "[ipv6-host]:http" or "[ipv6-host%zone]:80"
# For single "bindAddr" field, no need square brackets, like `bindAddr = "::"`.
bindAddr = "0.0.0.0"
bindPort = 7000
# udp port used for kcp protocol, it can be same with 'bindPort'.
# if not set, kcp is disabled in frps.
kcpBindPort = 7000
# udp port used for quic protocol.
# if not set, quic is disabled in frps.
# quicBindPort = 7002
# Specify which address proxy will listen for, default value is same with bindAddr
# proxyBindAddr = "127.0.0.1"
# quic protocol options
# transport.quic.keepalivePeriod = 10
# transport.quic.maxIdleTimeout = 30
# transport.quic.maxIncomingStreams = 100000
# Heartbeat configure, it's not recommended to modify the default value
# The default value of heartbeatTimeout is 90. Set negative value to disable it.
# transport.heartbeatTimeout = 90
# Pool count in each proxy will keep no more than maxPoolCount.
transport.maxPoolCount = 5
# If tcp stream multiplexing is used, default is true
# transport.tcpMux = true
# Specify keep alive interval for tcp mux.
# only valid if tcpMux is true.
# transport.tcpMuxKeepaliveInterval = 60
# tcpKeepalive specifies the interval between keep-alive probes for an active network connection between frpc and frps.
# If negative, keep-alive probes are disabled.
# transport.tcpKeepalive = 7200
# transport.tls.force specifies whether to only accept TLS-encrypted connections. By default, the value is false.
tls.force = false
# transport.tls.certFile = "server.crt"
# transport.tls.keyFile = "server.key"
# transport.tls.trustedCaFile = "ca.crt"
# If you want to support virtual host, you must set the http port for listening (optional)
# Note: http port and https port can be same with bindPort
vhostHTTPPort = 80
vhostHTTPSPort = 443
# Response header timeout(seconds) for vhost http server, default is 60s
# vhostHTTPTimeout = 60
# tcpmuxHTTPConnectPort specifies the port that the server listens for TCP
# HTTP CONNECT requests. If the value is 0, the server will not multiplex TCP
# requests on one single port. If it's not - it will listen on this value for
# HTTP CONNECT requests. By default, this value is 0.
# tcpmuxHTTPConnectPort = 1337
# If tcpmuxPassthrough is true, frps won't do any update on traffic.
# tcpmuxPassthrough = false
# Configure the web server to enable the dashboard for frps.
# dashboard is available only if webServer.port is set.
webServer.addr = "127.0.0.1"
webServer.port = 7500
webServer.user = "admin"
webServer.password = "admin"
# webServer.tls.certFile = "server.crt"
# webServer.tls.keyFile = "server.key"
# dashboard assets directory(only for debug mode)
# webServer.assetsDir = "./static"
# Enable golang pprof handlers in dashboard listener.
# Dashboard port must be set first
webServer.pprofEnable = false
# enablePrometheus will export prometheus metrics on webServer in /metrics api.
enablePrometheus = true
# console or real logFile path like ./frps.log
log.to = "./frps.log"
# trace, debug, info, warn, error
log.level = "info"
log.maxDays = 3
# disable log colors when log.to is console, default is false
log.disablePrintColor = false
# DetailedErrorsToClient defines whether to send the specific error (with debug info) to frpc. By default, this value is true.
detailedErrorsToClient = true
# auth.method specifies what authentication method to use authenticate frpc with frps.
# If "token" is specified - token will be read into login message.
# If "oidc" is specified - OIDC (Open ID Connect) token will be issued using OIDC settings. By default, this value is "token".
auth.method = "token"
# auth.additionalScopes specifies additional scopes to include authentication information.
# Optional values are HeartBeats, NewWorkConns.
# auth.additionalScopes = ["HeartBeats", "NewWorkConns"]
# auth token
auth.token = "12345678"
# oidc issuer specifies the issuer to verify OIDC tokens with.
auth.oidc.issuer = ""
# oidc audience specifies the audience OIDC tokens should contain when validated.
auth.oidc.audience = ""
# oidc skipExpiryCheck specifies whether to skip checking if the OIDC token is expired.
auth.oidc.skipExpiryCheck = false
# oidc skipIssuerCheck specifies whether to skip checking if the OIDC token's issuer claim matches the issuer specified in OidcIssuer.
auth.oidc.skipIssuerCheck = false
# userConnTimeout specifies the maximum time to wait for a work connection.
# userConnTimeout = 10
# Only allow frpc to bind ports you list. By default, there won't be any limit.
allowPorts = [
{ start = 2000, end = 3000 },
{ single = 3001 },
{ single = 3003 },
{ start = 4000, end = 50000 }
]
# Max ports can be used for each client, default value is 0 means no limit
maxPortsPerClient = 0
# If subDomainHost is not empty, you can set subdomain when type is http or https in frpc's configure file
# When subdomain is est, the host used by routing is test.frps.com
subDomainHost = "frps.com"
# custom 404 page for HTTP requests
# custom404Page = "/path/to/404.html"
# specify udp packet size, unit is byte. If not set, the default value is 1500.
# This parameter should be same between client and server.
# It affects the udp and sudp proxy.
udpPacketSize = 1500
# Retention time for NAT hole punching strategy data.
natholeAnalysisDataReserveHours = 168
[[httpPlugins]]
name = "user-manager"
addr = "127.0.0.1:9000"
path = "/handler"
ops = ["Login"]
[[httpPlugins]]
name = "port-manager"
addr = "127.0.0.1:9001"
path = "/handler"
ops = ["NewProxy"]
frpc.toml完整配置文件:
# This configuration file is for reference only. Please do not use this configuration directly to run the program as it may have various issues.
# your proxy name will be changed to {user}.{proxy}
user = "your_name"
# A literal address or host name for IPv6 must be enclosed
# in square brackets, as in "[::1]:80", "[ipv6-host]:http" or "[ipv6-host%zone]:80"
# For single serverAddr field, no need square brackets, like serverAddr = "::".
serverAddr = "0.0.0.0"
serverPort = 7000
# STUN server to help penetrate NAT hole.
# natHoleStunServer = "stun.easyvoip.com:3478"
# Decide if exit program when first login failed, otherwise continuous relogin to frps
# default is true
loginFailExit = true
# console or real logFile path like ./frpc.log
log.to = "./frpc.log"
# trace, debug, info, warn, error
log.level = "info"
log.maxDays = 3
# disable log colors when log.to is console, default is false
log.disablePrintColor = false
auth.method = "token"
# auth.additionalScopes specifies additional scopes to include authentication information.
# Optional values are HeartBeats, NewWorkConns.
# auth.additionalScopes = ["HeartBeats", "NewWorkConns"]
# auth token
auth.token = "12345678"
# oidc.clientID specifies the client ID to use to get a token in OIDC authentication.
# auth.oidc.clientID = ""
# oidc.clientSecret specifies the client secret to use to get a token in OIDC authentication.
# auth.oidc.clientSecret = ""
# oidc.audience specifies the audience of the token in OIDC authentication.
# auth.oidc.audience = ""
# oidc.scope specifies the permisssions of the token in OIDC authentication if AuthenticationMethod == "oidc". By default, this value is "".
# auth.oidc.scope = ""
# oidc.tokenEndpointURL specifies the URL which implements OIDC Token Endpoint.
# It will be used to get an OIDC token.
# auth.oidc.tokenEndpointURL = ""
# oidc.additionalEndpointParams specifies additional parameters to be sent to the OIDC Token Endpoint.
# For example, if you want to specify the "audience" parameter, you can set as follow.
# frp will add "audience=<value>" "var1=<value>" to the additional parameters.
# auth.oidc.additionalEndpointParams.audience = "https://dev.auth.com/api/v2/"
# auth.oidc.additionalEndpointParams.var1 = "foobar"
# Set admin address for control frpc's action by http api such as reload
webServer.addr = "127.0.0.1"
webServer.port = 7400
webServer.user = "admin"
webServer.password = "admin"
# Admin assets directory. By default, these assets are bundled with frpc.
# webServer.assetsDir = "./static"
# Enable golang pprof handlers in admin listener.
webServer.pprofEnable = false
# The maximum amount of time a dial to server will wait for a connect to complete. Default value is 10 seconds.
# transport.dialServerTimeout = 10
# dialServerKeepalive specifies the interval between keep-alive probes for an active network connection between frpc and frps.
# If negative, keep-alive probes are disabled.
# transport.dialServerKeepalive = 7200
# connections will be established in advance, default value is zero
transport.poolCount = 5
# If tcp stream multiplexing is used, default is true, it must be same with frps
# transport.tcpMux = true
# Specify keep alive interval for tcp mux.
# only valid if tcpMux is enabled.
# transport.tcpMuxKeepaliveInterval = 60
# Communication protocol used to connect to server
# supports tcp, kcp, quic, websocket and wss now, default is tcp
transport.protocol = "tcp"
# set client binding ip when connect server, default is empty.
# only when protocol = tcp or websocket, the value will be used.
transport.connectServerLocalIP = "0.0.0.0"
# if you want to connect frps by http proxy or socks5 proxy or ntlm proxy, you can set proxyURL here or in global environment variables
# it only works when protocol is tcp
# transport.proxyURL = "http://user:passwd@192.168.1.128:8080"
# transport.proxyURL = "socks5://user:passwd@192.168.1.128:1080"
# transport.proxyURL = "ntlm://user:passwd@192.168.1.128:2080"
# quic protocol options
# transport.quic.keepalivePeriod = 10
# transport.quic.maxIdleTimeout = 30
# transport.quic.maxIncomingStreams = 100000
# If tls.enable is true, frpc will connect frps by tls.
# Since v0.50.0, the default value has been changed to true, and tls is enabled by default.
transport.tls.enable = true
# transport.tls.certFile = "client.crt"
# transport.tls.keyFile = "client.key"
# transport.tls.trustedCaFile = "ca.crt"
# transport.tls.serverName = "example.com"
# If the disableCustomTLSFirstByte is set to false, frpc will establish a connection with frps using the
# first custom byte when tls is enabled.
# Since v0.50.0, the default value has been changed to true, and the first custom byte is disabled by default.
# transport.tls.disableCustomTLSFirstByte = true
# Heartbeat configure, it's not recommended to modify the default value.
# The default value of heartbeatInterval is 10 and heartbeatTimeout is 90. Set negative value
# to disable it.
# transport.heartbeatInterval = 30
# transport.heartbeatTimeout = 90
# Specify a dns server, so frpc will use this instead of default one
# dnsServer = "8.8.8.8"
# Proxy names you want to start.
# Default is empty, means all proxies.
# start = ["ssh", "dns"]
# Specify udp packet size, unit is byte. If not set, the default value is 1500.
# This parameter should be same between client and server.
# It affects the udp and sudp proxy.
udpPacketSize = 1500
# Additional metadatas for client.
metadatas.var1 = "abc"
metadatas.var2 = "123"
# Include other config files for proxies.
# includes = ["./confd/*.ini"]
[[proxies]]
# 'ssh' is the unique proxy name
# If global user is not empty, it will be changed to {user}.{proxy} such as 'your_name.ssh'
name = "ssh"
type = "tcp"
localIP = "127.0.0.1"
localPort = 22
# Limit bandwidth for this proxy, unit is KB and MB
transport.bandwidthLimit = "1MB"
# Where to limit bandwidth, can be 'client' or 'server', default is 'client'
transport.bandwidthLimitMode = "client"
# If true, traffic of this proxy will be encrypted, default is false
transport.useEncryption = false
# If true, traffic will be compressed
transport.useCompression = false
# Remote port listen by frps
remotePort = 6001
# frps will load balancing connections for proxies in same group
loadBalancer.group = "test_group"
# group should have same group key
loadBalancer.groupKey = "123456"
# Enable health check for the backend service, it supports 'tcp' and 'http' now.
# frpc will connect local service's port to detect it's healthy status
healthCheck.type = "tcp"
# Health check connection timeout
healthCheck.timeoutSeconds = 3
# If continuous failed in 3 times, the proxy will be removed from frps
healthCheck.maxFailed = 3
# every 10 seconds will do a health check
healthCheck.intervalSeconds = 10
# additional meta info for each proxy
metadatas.var1 = "abc"
metadatas.var2 = "123"
[[proxies]]
name = "ssh_random"
type = "tcp"
localIP = "192.168.31.100"
localPort = 22
# If remotePort is 0, frps will assign a random port for you
remotePort = 0
[[proxies]]
name = "dns"
type = "udp"
localIP = "114.114.114.114"
localPort = 53
remotePort = 6002
# Resolve your domain names to [serverAddr] so you can use http://web01.yourdomain.com to browse web01 and http://web02.yourdomain.com to browse web02
[[proxies]]
name = "web01"
type = "http"
localIP = "127.0.0.1"
localPort = 80
# http username and password are safety certification for http protocol
# if not set, you can access this customDomains without certification
httpUser = "admin"
httpPassword = "admin"
# if domain for frps is frps.com, then you can access [web01] proxy by URL http://web01.frps.com
subdomain = "web01"
customDomains = ["web01.yourdomain.com"]
# locations is only available for http type
locations = ["/", "/pic"]
# route requests to this service if http basic auto user is abc
# routeByHTTPUser = abc
hostHeaderRewrite = "example.com"
requestHeaders.set.x-from-where = "frp"
healthCheck.type = "http"
# frpc will send a GET http request '/status' to local http service
# http service is alive when it return 2xx http response code
healthCheck.path = "/status"
healthCheck.intervalSeconds = 10
healthCheck.maxFailed = 3
healthCheck.timeoutSeconds = 3
[[proxies]]
name = "web02"
type = "https"
localIP = "127.0.0.1"
localPort = 8000
subdomain = "web02"
customDomains = ["web02.yourdomain.com"]
# if not empty, frpc will use proxy protocol to transfer connection info to your local service
# v1 or v2 or empty
transport.proxyProtocolVersion = "v2"
[[proxies]]
name = "tcpmuxhttpconnect"
type = "tcpmux"
multiplexer = "httpconnect"
localIP = "127.0.0.1"
localPort = 10701
customDomains = ["tunnel1"]
# routeByHTTPUser = "user1"
[[proxies]]
name = "plugin_unix_domain_socket"
type = "tcp"
remotePort = 6003
# if plugin is defined, localIP and localPort is useless
# plugin will handle connections got from frps
[proxies.plugin]
type = "unix_domain_socket"
unixPath = "/var/run/docker.sock"
[[proxies]]
name = "plugin_http_proxy"
type = "tcp"
remotePort = 6004
[proxies.plugin]
type = "http_proxy"
httpUser = "abc"
httpPassword = "abc"
[[proxies]]
name = "plugin_socks5"
type = "tcp"
remotePort = 6005
[proxies.plugin]
type = "socks5"
username = "abc"
password = "abc"
[[proxies]]
name = "plugin_static_file"
type = "tcp"
remotePort = 6006
[proxies.plugin]
type = "static_file"
localPath = "/var/www/blog"
stripPrefix = "static"
httpUser = "abc"
httpPassword = "abc"
[[proxies]]
name = "plugin_https2http"
type = "https"
customDomains = ["test.yourdomain.com"]
[proxies.plugin]
type = "https2http"
localAddr = "127.0.0.1:80"
crtPath = "./server.crt"
keyPath = "./server.key"
hostHeaderRewrite = "127.0.0.1"
requestHeaders.set.x-from-where = "frp"
[[proxies]]
name = "plugin_https2https"
type = "https"
customDomains = ["test.yourdomain.com"]
[proxies.plugin]
type = "https2https"
localAddr = "127.0.0.1:443"
crtPath = "./server.crt"
keyPath = "./server.key"
hostHeaderRewrite = "127.0.0.1"
requestHeaders.set.x-from-where = "frp"
[[proxies]]
name = "plugin_http2https"
type = "http"
customDomains = ["test.yourdomain.com"]
[proxies.plugin]
type = "http2https"
localAddr = "127.0.0.1:443"
hostHeaderRewrite = "127.0.0.1"
requestHeaders.set.x-from-where = "frp"
[[proxies]]
name = "secret_tcp"
# If the type is secret tcp, remotePort is useless
# Who want to connect local port should deploy another frpc with stcp proxy and role is visitor
type = "stcp"
# secretKey is used for authentication for visitors
secretKey = "abcdefg"
localIP = "127.0.0.1"
localPort = 22
# If not empty, only visitors from specified users can connect.
# Otherwise, visitors from same user can connect. '*' means allow all users.
allowUsers = ["*"]
[[proxies]]
name = "p2p_tcp"
type = "xtcp"
secretKey = "abcdefg"
localIP = "127.0.0.1"
localPort = 22
# If not empty, only visitors from specified users can connect.
# Otherwise, visitors from same user can connect. '*' means allow all users.
allowUsers = ["user1", "user2"]
# frpc role visitor -> frps -> frpc role server
[[visitors]]
name = "secret_tcp_visitor"
type = "stcp"
# the server name you want to visitor
serverName = "secret_tcp"
secretKey = "abcdefg"
# connect this address to visitor stcp server
bindAddr = "127.0.0.1"
# bindPort can be less than 0, it means don't bind to the port and only receive connections redirected from
# other visitors. (This is not supported for SUDP now)
bindPort = 9000
[[visitors]]
name = "p2p_tcp_visitor"
type = "xtcp"
# if the server user is not set, it defaults to the current user
serverUser = "user1"
serverName = "p2p_tcp"
secretKey = "abcdefg"
bindAddr = "127.0.0.1"
# bindPort can be less than 0, it means don't bind to the port and only receive connections redirected from
# other visitors. (This is not supported for SUDP now)
bindPort = 9001
# when automatic tunnel persistence is required, set it to true
keepTunnelOpen = false
# effective when keepTunnelOpen is set to true, the number of attempts to punch through per hour
maxRetriesAnHour = 8
minRetryInterval = 90
# fallbackTo = "stcp_visitor"
# fallbackTimeoutMs = 500
相比老版本,差距还是很大的,如果不需要什么新功能或者懒得折腾,我建议老版本也是一样的。
#emby刮削阿里云盘影视
这几天折腾最多的就是它——emby,这也是受老朱的影响,之前感觉看电影的时间不是很多,也用不着搭建个服务这么麻烦。刚看完了神鬼八阵图,在电脑前看电脑,上厕所、洗澡、烧菜看手机或者平板,每次切换好麻烦,于是就想搭建个emby,这样各种设备就可以无缝衔接了。
影视资源阿里云盘用的多,有人说百度网盘也不少,它那速度我早放弃了,你有会员你牛逼。阿里云盘看个1080P电影还是很流畅的。所以我想法是这样的:将阿里云盘通过webdav挂载到Linux服务器上,emby直接加wendav里的资源就可以了。以前用的nas,docker,很简单,鼠标点点就可以了。如今要在Linux服务器上实现,基本上全是命令符了。现在Linux用的是Debian。因为它对lnmp最友好,系统也比较省资源。
##挂载webdav
挂载webdav我用rclone,这个应该是最简单方便的把(系统自带的mount.davfs也可以挂载,只是emby不能访问)。安装一条命令:
curl https://rclone.org/install.sh | sudo bash
配置用rclone config命令,主要就是name、url、user、password填好即可,一步步来就可以了。
最后关键是挂载阿里云盘的命令。
rclone mount 远程名称:/ 本地挂载路径 --cache-dir /tmp --allow-other --vfs-cache-mode writes --header "Referer:https://www.aliyundrive.com/drive"
譬如:
rclone mount alist:/ /mnt/alist --cache-dir /tmp --allow-other --vfs-cache-mode writes --header "Referer:https://www.aliyundrive.com/drive"
没错,远程名称就是rclone config配置的name,本地挂载路径随你自己选择,不过事先建好文件夹即可。
然后来个开机自启。
#将加粗的部分改成你的,然后整段代码扔进ssh里,回车;
command="mount alist:/ /home/alist --cache-dir /tmp --allow-other --vfs-cache-mode writes --header "Referer:https://www.aliyundrive.com/drive""
cat > /etc/systemd/system/rclone.service <<EOF
[Unit]
Description=Rclone
After=network-online.target
[Service]
Type=simple
ExecStart=$(command -v rclone) ${command}
Restart=on-abort
User=root
[Install]
WantedBy=default.target
EOF
webdav最简单的搭建就是alist了,它既能添加绝大部分网盘资源,又能自动搭建webdav服务,确实是我见过最强大的网盘整合工具了。听说天翼网盘和中国移动网盘都是不限速的,做电影盘最好了。
##安装emby
emby官网下载对应的Debian安装包.deb,然后使用一条命令安装成功:
dpkg -i emby-server-deb_4.7.14.0_amd64.deb
然后你就可以通过IP:8096访问到emby了。
##刮削阿里云影视资源
刮削这个活真不好做,我是折腾了好几天都没刮干净。你也可以搜索现成刮削好的网盘资源。刮削最关键的一步就是整理好资源的格式。iOS系统有一款软件叫VidHub,目前免费,干净无广告,可以连接阿里云盘,直接刮削阿里云盘的影视,只是刮削的数据只在播放器里使用。我最欣赏的是它对文件命名规则的整理。
1 - 电影文件名以影片的完整名字开头(中英文均可),后面带上其他相关的文件信息。
The.Irishman.爱尔兰人.2019.1080p.x264.mp4
2 - 电视剧分集文件名以剧名开头(同一部剧所有分集文件开头的剧名保持一致,中英文均可),后面必须跟上季和集的信息(S01E01/第一季第一集)。
Shameless.无耻之徒.S01E01.1080p.AMZN.WEB-DL.mkv
Shameless.无耻之徒.S03E03.720p.AMZN.WEB-DL.mkv
补充:因为emby的规则电视剧文件夹的结构是这样的:
神鬼八阵图(2006) \ Season 1 \ 神鬼八阵图.S01E01.1080p.AVC1.AC.mp4
3 - 电视剧花絮、特别篇文件名以剧名开头,后面的季数信息必须设置为0,并指定集数(S00E01)。
Shameless.无耻之徒.S00E01.Sneak Peek.1080p.AMZN.mkv
老朱介绍了一款TMM——tinyMediaManager软件,4.x版本不建议用,有限制收费。不过破解论坛里有不限制版本,我用过,不知道是不是姿势不对,看不到刮削的状态,看着干着急就放弃了。软件不错,只是资源不好弄,themoviedb资源时好时坏,不好刮削。需要的朋友可以看看他的方法。
##介绍两个好东西
IPTV直播源:https://live.fanmingming.com/
阿里云网盘搜索工具:https://www.upyunso.com
好了,这几天折腾的东西都整理好了,满满的干货有没有。
本文链接: 记录这几天折腾的东西
frp稳定性还有问题,推荐下https://dusays.com/637/
1年前 · 北京 · Microsoft Edge 119 Windows 10
@TeacherDu 你不说我还不知道有这么多内网穿透服务
1年前 · 安徽 · Firefox 119 Windows 10
@皇家元林 这个还是很简单的!
1年前 · 北京 · Microsoft Edge 119 Windows 10
好多好东西,我来学习了
1年前 · 嘉兴 · WebView 4 Android 14
@老朱同志 哈哈。多多指教
1年前 · 安徽 · Firefox 119 Windows 10
看规则,阿里云99/年这个服务器似乎最多只能保有两年。
P.S.规则描述得异常复杂。
1年前 · 广州 · Google Chrome 109 Windows 10
@天一生水 两年其实也还好了,我一个月前才花500多买的轻量服务器,现在退了450多呢。
1年前 · 合肥 · Microsoft Edge 119 Windows 10
@皇家元林 跟我一样的操作啊!也退了不少钱。想想是不是挣了!
我再去看了下规则,似乎修改了,明确了每年可以续费一次,直到2016年。最开始似乎只是说整个活动期间只能99元续费一次。也可能是我记错了。
1年前 · 广州 · Google Chrome 109 Windows 10
@天一生水 那挺好,哈哈,这叫双赢,他满意,我们也满意
1年前 · 合肥 · Wordpress App 23 iPhone iOS 16.6.1
这个 99 的服务器最近蛮火爆的,但是我是不想折腾了。
1年前 · 济南 · Google Chrome 118 Mac OS X 10.15
@obaby 是啊!这个价格很难遇到了,能省点是一点。
1年前 · 合肥 · Wordpress App 23 iPhone iOS 16.6.1
我也想玩玩frp,现在的2h4g5m服务器,经常会卡逼,但是看你上面的那些代码,感觉头大,可能要抽时间好好折腾一下了。
1年前 · 邵阳 · Microsoft Edge 119 Windows 10
@墨铺网 你这带宽高啊,这个配置不应该卡啊。frp 一般用到的配置很简单的!
1年前 · 六安 · Wordpress App 23 iPhone iOS 16.6.1
国内服务器商骚操作太多,不折腾
1年前 · 梅州 · Firefox 119 Windows 10
@zwwooooo 主要还是便宜,现在数据都在自己手里,转移不费事,还安全!
1年前 · 马鞍山 · Wordpress App 23 iPhone iOS 16.6.1